How To Set Up Keep Smile Led Lights

The installation guide is for 12V LED strip low-cal kit. LED strip Lights are great for decorating your habitation. Its uncomplicated and superb design can embellish the color of the home stereo space and heighten the atmosphere.

Now you can sentinel the video or follow the steps below to check how to install, cut and connect LED strip lights.

Part 1. How to Install LED Strip Lights

Part two. How to Cut LED Lights Strip

Part iii. How to Connect LED Strip Light Sections

Part 1. How to Install LED Strip Lights?

Step one. Dry and make clean the surface

Earlier adhering any strip lights, clean the surface of the area you volition be placing the lights on. This is vital to keeping it mounted for a long time to come. It is recommended to apply your strip lights on shine stable surfaces. It should non be placed on crude or textured surfaces or whatever surfaces that tin curve or move.

Pace two. Unroll the light strip, stick to the surface

The LED strip lights come rolled on a spool. Simply unroll the length of lighting you will be working with, remove the agglutinative backing and stick to the desired surface. Press downwards on each part of the strip and so it is firmly adhered to the surface and has no air bubbling.

You can employ fixing clips to strengthen the strip light's installation and ensure they stay in place. Peel off the agglutinative record and utilize it to the surface with the non-gummy expanse over the strip calorie-free.  If y'all cull, yous tin can secure the clip further by screwing it to the surface.

Notice: Not all of the LED strip lights on lepro.com are equipped with the fixing clips, please check the new models if needed.

Pace iii. Connect LED low-cal strip and turn on the light

Once your strip lights are secured, you can adhere information technology to the controller and power adapter, then plug information technology into an electrical outlet. Using the remote control, remove the insulation canvas kickoff, press whatever color on the remote control to modify the lighting color.

Part 2. How to Cut LED Lights Strip

Each strip light has special designated sections where you can cut the strip. Exist certain to brand a clean straight cut only in these designated sections. Cutting information technology in a non-designated expanse volition impairment the strip lights.

Office 3. How to Connect LED Strip Calorie-free Sections

Did you know you tin can design your strip lights to make twists and turns, go around corners or fifty-fifty over non-flat surfaces? Use the corner or straight flexible connectors and connector clips.

To bring together two strip light sections together, use a connector clip. Push the open end of each strip into the clip, then shut it to lock information technology in.

To brand your light strips become effectually a corner, use one corner connector and 2 connector clips.

You can fifty-fifty brand your strip lights go over uneven surfaces if you need to. Connect a flexible strip connector to the strip lights and over the uneven area. Connect the other end to the residue of the lighting.

Now you tin can feel complimentary to change and choose the light color atmosphere you desire. If you utilise a remote command, don't forget to unplug the battery insulation sheet before use.

For rough surfaces, you may need to install mounting clips to go on the strip light stable. For moist places similar bathrooms, waterproof strip lights are recommended. And now you can check the LED strip lights category to get more.

Source: https://www.lepro.com/learning/how-to-install-led-strip-lights/

Share this post